Technical Resources &
Product Documentation
Download product data sheets, installation guides, maintenance procedures, and technical bulletins for TL Environment membrane products. All documents are available in English.
Membrane Product Specifications
Full performance data sheets for all TL Environment membrane products. Each sheet includes nominal performance values, operating limits, physical dimensions, and test conditions.
TL-BW-8040 Industrial RO Membrane
8-inch Brackish Water RO Element — Data Sheet
TL-FR-8040 Fouling-Resistant RO Membrane
8-inch Fouling-Resistant RO Element — Data Sheet
TL-HR-8040 High-Recovery RO Membrane
8-inch High-Recovery / ZLD Pre-Treatment Element — Data Sheet
TL-SW-8040 Seawater RO Membrane
8-inch High-Rejection SWRO Element — Data Sheet
TL-SWL-8040 Low-Energy SWRO Membrane
8-inch Low-Energy Seawater RO Element — Data Sheet
TL-MBR-FS Flat Sheet MBR Module
Flat Sheet MBR Membrane Module — Data Sheet
TL-MBR-HF Hollow Fiber MBR Module
Hollow Fiber MBR Membrane Module — Data Sheet
Note: Full product data sheets are available upon inquiry. Contact our technical team at [email protected] or submit a request via the Contact page to receive the complete documentation package for your product of interest.
Installation, Maintenance & Design Guides
RO Element Installation & Commissioning Guide
Step-by-step procedures for RO element loading, system flushing, initial start-up, and performance verification.
REQUEST DOCUMENTMBR Module Installation Manual
Installation procedures for flat sheet and hollow fiber MBR modules including cassette assembly, aeration setup, and initial flux testing.
REQUEST DOCUMENTRO Membrane Cleaning Procedures
Chemical cleaning protocols for biological fouling, scaling, and colloidal fouling. Includes recommended cleaning agents, concentrations, and contact times.
REQUEST DOCUMENTMBR Membrane Maintenance & Recovery Cleaning
Maintenance cleaning and recovery cleaning procedures for MBR flat sheet and hollow fiber membranes. Includes sodium hypochlorite and citric acid protocols.
REQUEST DOCUMENTRO System Design Guidelines
Engineering guidelines for RO system design including element selection, array configuration, recovery calculation, and pre-treatment requirements.
REQUEST DOCUMENTMBR System Design Guidelines
Design guidelines for MBR systems including membrane sizing, aeration requirements, MLSS management, and integration with downstream RO treatment.
REQUEST DOCUMENTApplication & Technology Articles
Understanding RO Membrane Fouling: Causes, Prevention, and Recovery
Seawater RO System Pre-Treatment: SDI, Turbidity, and Coagulation
MBR vs. Conventional Activated Sludge: Performance Comparison for Industrial Wastewater
Zero Liquid Discharge (ZLD) System Architecture: RO and MBR Integration
View Full Product Specifications
Need a Specific Technical Document?
Contact our technical team with your product model and application details. We will provide the relevant data sheets, test reports, and design documentation for your project.